C.R.S. Section 38-52-103
Colorado coordinate system defined

(1)

The plane coordinate values for a point on the earth’s surface, used to express the geographic position or location of such point in the appropriate zone of this system, shall consist of two distances expressed in United States survey feet and decimals of a foot when using the Colorado coordinate system of 1927. One of these distances, to be known as the x-coordinate, shall give the position in an east-west direction; the other, to be known as the y-coordinate, shall give the position in a north-south direction. These coordinates shall be made to depend upon and conform to plane rectangular coordinate values for the monumented points of the North American horizontal geodetic control network as published by the national ocean survey/national geodetic survey (formerly the United States coast and geodetic survey), or its successors, and the plane coordinates of which have been computed on the systems defined in this article. Any such station may be used for establishing a survey connection to either Colorado coordinate system.

(2)

For the purposes of converting coordinates of the Colorado coordinate system of 1983 from meters to feet, the U.S. Survey Foot shall be used. The conversion factor is: One meter equals 3937/1200 feet.

Source: Section 38-52-103 — Colorado coordinate system defined, https://leg.­colorado.­gov/sites/default/files/images/olls/crs2023-title-38.­pdf (accessed Oct. 20, 2023).

Green check means up to date. Up to date

Current through Fall 2024

§ 38-52-103’s source at colorado​.gov