C.R.S. Section 1-5-407
Form of ballots


(1)

Intentionally left blank —Ed.

(a)

All ballots must be uniform and of sufficient length and width to allow for the names of candidates, officers, ballot issues, and ballot questions to be printed in clear, plain type, with a space between the different columns on the ballot. On each ballot the endorsement “Official ballot for ......................” must be printed, and after the word “for” follows the designation of the precinct, if appropriate, and the political subdivision for which the ballot is prepared, the date of the election, and a facsimile of the signature of the election official. The ballot shall not contain any caption or other endorsement, except as provided in this section. The election official shall use the same quality and tint of paper, the same kind of type, and the same quality and tint of plain black ink for all ballots prepared for one election.

(b)

If the designated election official, in his or her discretion, elects to use ballot stubs, each ballot may have either one or two stubs to be divided into two spaces by two perforated or dotted lines. Each such space must be at least one inch wide. The top portion is called the stub and the next portion is called the duplicate stub. All ballots prepared under this paragraph (b) must be numbered consecutively. The same number must be printed on both the stub and the duplicate stub.

(1.5)

Repealed.

(1.6)

A ballot stub may be used, but is not required, for a ballot produced on demand, so long as the quantity of ballots produced for the election can be reconciled by the ballot processing method used by the voting system. Such ballots may contain printed and distinguishing marks, so long as secrecy in voting is protected.

(2)

The ballots shall be printed so as to give to each eligible elector a clear opportunity to designate his or her choice of candidates, joint candidates, ballot issues, and ballot questions by a mark as instructed. On the ballot may be printed words that will aid the elector, such as “vote for not more than one”.

(3)

At the end of the list of candidates for each different office shall be one or more blank spaces in which the elector may write the name of any eligible person not printed on the ballot who has filed an affidavit of intent of write-in candidate pursuant to section 1-4-1101. The number of spaces provided shall be the lesser of the number of eligible electors who have properly filed an affidavit of intent of write-in candidate pursuant to section 1-4-1101 or the number of persons to be elected to the office. No such blank spaces shall be provided if no eligible elector properly filed an affidavit of intent of write-in candidate.

(4)

The names of the candidates for each office shall be arranged under the designation of the office as provided in section 1-5-404. The designated election official shall not print, in connection with any name, any title or degree designating the business or profession of the candidate. Each candidate’s name may include one nickname, if the candidate regularly uses the nickname and the nickname does not include any part of a political party name.

(4.5)

If no candidate has been duly nominated and no person has properly filed an affidavit of intent of write-in candidate for an office, the following text shall appear under the designation of the office: “There are no candidates for this office.”.

(5)

Intentionally left blank —Ed.

(a)

Whenever the approval of a ballot issue or ballot question is submitted to the vote of the people, the ballot issue or question shall be printed upon the ballot following the lists of candidates. Except as otherwise provided in section 32-9-119.3 (2), C.R.S., referred amendments shall be printed first, followed by initiated amendments, referred propositions, initiated propositions, county issues and questions, municipal issues and questions, school district issues and questions, ballot issues and questions for other political subdivisions which are in more than one county, and then ballot issues and questions for other political subdivisions which are wholly within a county.

(b)

Beginning with the 2010 general election:

(I)

Each proposed change to the state constitution, whether initiated by the people or referred to the people by the general assembly, shall be identified on the ballot as an “amendment”;

(II)

Each proposed change to the Colorado Revised Statutes, whether initiated by the people or referred to the people by the general assembly, shall be identified on the ballot as a “proposition”; and

(III)

A ballot issue or question containing both a proposed change to the state constitution and a proposed change to the Colorado Revised Statutes shall be identified on the ballot as an “amendment”.

(5.3)

Intentionally left blank —Ed.

(a)

Commencing with the general election held in November 2010, each statewide measure initiated by the people that is a proposed change to the state constitution shall be numbered consecutively in regular numerical order beginning with the number sixty. Such consecutive numbering of measures shall continue at any odd-year or general election held after such election at which any such measure is on the ballot beginning with the number following the highest number utilized in the previous election until the number ninety-nine is utilized at an election for any such measure. Such measures shall again be numbered consecutively in regular numerical order beginning with the number one and in accordance with this paragraph (a) following the utilization of the number ninety-nine for any such measure. The secretary of state may promulgate rules as may be necessary to administer this paragraph (a). Such rules shall be promulgated in accordance with article 4 of title 24, C.R.S.

(b)

Commencing with the general election held in November 2010, each statewide measure initiated by the people that is a proposed change to the Colorado Revised Statutes shall be numbered consecutively in regular numerical order beginning with the number one hundred one. Such consecutive numbering of measures shall continue at any odd-year or general election held after such election at which any such measure is on the ballot beginning with the number following the highest number utilized in the previous election until the number one hundred ninety-nine is utilized at an election for any such measure. Such measures shall again be numbered consecutively in regular numerical order beginning with the number one hundred one and in accordance with this paragraph (b) following the utilization of the number one hundred ninety-nine for any such measure. The secretary of state may promulgate rules as may be necessary to administer this paragraph (b). Such rules shall be promulgated in accordance with article 4 of title 24, C.R.S.

(5.4)

Intentionally left blank —Ed.

(a)

Commencing with the general election held in November 2010, each statewide measure referred to the people by the general assembly that is a proposed change to the state constitution shall be lettered consecutively in regular alphabetical order beginning with the letter P. The consecutive lettering of such statewide referred measures shall continue at any odd-year or general election held after the election at which any statewide referred measure is on the ballot beginning with the letter following the last letter utilized in the previous election until the letter Z is utilized at an election for such a statewide referred measure. Such statewide referred measures shall again be lettered consecutively in regular alphabetical order beginning with the letter A and in accordance with this paragraph (a) following the utilization of the letter Z for any such statewide referred measure. The secretary of state may promulgate rules as may be necessary to administer this paragraph (a). Any rules shall be promulgated in accordance with article 4 of title 24, C.R.S.

(b)

Commencing with the general election held in November 2010, each statewide measure referred to the people by the general assembly that is a proposed change to the Colorado Revised Statutes shall be double-lettered consecutively in regular alphabetical order beginning with the letters AA. The consecutive lettering of such statewide referred measures shall continue at any odd-year or general election held after the election at which any statewide referred measure is on the ballot beginning with the letters following the last letters utilized in the previous election until the letters ZZ are utilized at an election for such a statewide referred measure. Such statewide referred measures shall again be lettered consecutively in regular alphabetical order beginning with the letters AA and in accordance with this paragraph (b) following the utilization of the letters ZZ for any such statewide referred measure. The secretary of state may promulgate rules as may be necessary to administer this paragraph (b). Any rules shall be promulgated in accordance with article 4 of title 24, C.R.S.

(5.5)

The coordinated election official may choose to follow the provisions of subsection (5) of this section, or may choose to use separate ballots. If separate ballots are used, the candidates shall be listed first, followed by measures to increase taxes, measures to increase debt, citizen petitions, and referred measures.

(6)

Whenever candidates are to be voted for only by the eligible electors of a particular district, county, or other political subdivision, the names of those candidates shall not be printed on any ballots other than those provided for use in the district, county, or political subdivision in which those candidates are to be voted on.

(7)

No printing or distinguishing marks shall be on the ballot except as specifically provided in this code, or in section 1-40-106 (3)(e) to (3)(g) and (3)(j).

(8)

Repealed.

(9)

If a referred measure, including but not limited to a measure referred by the school board of a multicounty school district or the board of directors of a multicounty special district to the registered electors of the school district or special district, is referred to registered electors of multiple counties, the alphabetical, numerical, or alphanumerical designation used to identify the measure shall be identical on each ballot that includes the measure.

Source: Section 1-5-407 — Form of ballots, https://leg.­colorado.­gov/sites/default/files/images/olls/crs2023-title-01.­pdf (accessed Oct. 20, 2023).

1‑5‑101
Establishing precincts and polling places for partisan elections
1‑5‑101.5
Precinct numbering
1‑5‑102
Establishing precincts and voter service and polling centers for nonpartisan elections
1‑5‑102.9
Voter service and polling centers - number required - services provided - drop-off locations - definition
1‑5‑103
Changes in boundaries - partisan elections
1‑5‑104
Changes in boundaries - nonpartisan elections
1‑5‑105
Restrictions
1‑5‑106
Polling location or drop-off location - designation by sign
1‑5‑108
Election judges may change polling locations and drop-off locations
1‑5‑201.5
Legislative declaration - purpose
1‑5‑203
Certification of ballot
1‑5‑205
Published and posted notice of election - content
1‑5‑206.7
Failure to receive mailed notice
1‑5‑207
Court-ordered elections
1‑5‑208
Election may be canceled - when
1‑5‑301
Registration record for partisan elections
1‑5‑302
Computer lists may be used in lieu of original registration records
1‑5‑303
Registration records for nonpartisan elections
1‑5‑304
Lists of property owners
1‑5‑401
Method of voting
1‑5‑402
Primary election ballots
1‑5‑403
Content of ballots for general and congressional vacancy elections
1‑5‑404
Arrangement of names on ballots for partisan elections
1‑5‑406
Content of ballots for nonpartisan elections
1‑5‑407
Form of ballots
1‑5‑408
Form of ballots - electronic voting
1‑5‑409
Single cross mark for party slate not permitted
1‑5‑410
Printing and distribution of ballots
1‑5‑411
Substitute ballots
1‑5‑412
Correction of errors
1‑5‑413
Sample ballots
1‑5‑501
Sufficient voting booths, voting machines, or electronic voting equipment
1‑5‑502
Ballot boxes for nonmachine voting
1‑5‑503
Arrangement of voting equipment or voting booths and ballot boxes
1‑5‑504
Instruction cards
1‑5‑504.5
Items to be posted at polling locations
1‑5‑505
Election expenses to be paid by county - repeal
1‑5‑505.5
State reimbursement to counties for ballot measure elections
1‑5‑506
Election expenses in nonpartisan elections
1‑5‑507
County clerk and recorder to give estimate
1‑5‑601
Use of voting systems - definition
1‑5‑601.5
Compliance with federal requirements
1‑5‑603
Adoption and payment for voting machines
1‑5‑605.5
Custody of voting system
1‑5‑605.7
Mechanical lever voting machines - prohibited
1‑5‑606
Election officials and employees not to have interest in voting equipment or devices
1‑5‑607
Elected officials not to handle voting equipment or devices
1‑5‑608.2
Punch card voting systems - prohibited
1‑5‑608.5
Electromechanical voting systems - testing by federally accredited labs - certification and approval of purchasing of electromechanical voting systems by secretary of state - conditions of use by secretary of state - testing
1‑5‑610
Preparation for use - electronic voting
1‑5‑611
Requirements - nonpunch card electronic voting systems
1‑5‑612
Use of electronic and electromechanical voting systems
1‑5‑613
Purchase and sale of voting equipment
1‑5‑615
Electromechanical voting systems - requirements
1‑5‑616
Electromechanical voting systems - standards - procedures
1‑5‑617
Examination - testing - certification
1‑5‑618
Modification of electronic and electromechanical voting systems - definition
1‑5‑619
Temporary use of electronic and electromechanical voting systems
1‑5‑620
Electronic or electromechanical voting system information - software
1‑5‑621
Compliance - definitions
1‑5‑623
Special rules applicable to use, modification, or purchase of electronic voting devices or systems and related components prior to 2014 - legislative declaration - rules
1‑5‑701
Legislative declaration - federal funds
1‑5‑702
Definitions
1‑5‑703
Accessibility of polling locations to persons with disabilities
1‑5‑704
Standards for accessible voting systems
1‑5‑705
Accessible voter interface devices - minimum requirement
1‑5‑706
Ballot access for voters with a disability - definition
1‑5‑801
Acquisition of voting systems - voter-verified paper record
1‑5‑802
Use of voting systems - voter-verified paper record
1‑5‑901
Short title
1‑5‑902
Legislative declaration - intent
1‑5‑903
Definitions
1‑5‑904
Multilingual ballot hotline - creation - secretary of state - rules
1‑5‑905
Multilingual ballot access - general provisions - requirements of secretary of state - county clerks
1‑5‑906
Minority language sample ballots - county clerk
1‑5‑907
In-person minority language ballot - county clerk - voter service and polling centers
1‑5‑908
State assistance to counties for implementation costs
Green check means up to date. Up to date

Current through Fall 2024

§ 1-5-407’s source at colorado​.gov